Store the surplus from your existing photovoltaic installation and use your own electricity in the evening, without replacing your inverter or touching your panels.
Universal AC coupling · 2 400 W bidirectional · Expandable to 16,8 kWh
LiFePO4 energy storage 2,4 kWhExpandable to 16,8 kWh2 400 W bidirectional ACCompatible with existing PV10-year warranty
•
Universal AC coupling
Compatible with 100% of rooftop PV inverters on the market: store your surplus without replacing anything.
•
2 400 W bidirectional
Charge and discharge up to 2 400 W to power ovens, hobs and consumption peaks (800 W by default).
•
Modular LiFePO4 energy storage
From 2,4 to 16,8 kWh by stacking up to 5 AB3000L batteries of 2,88 kWh each.
•
ZENKI™ 2.0 AI
Forecasts your production and electricity prices, then schedules charging and discharging. 840+ European suppliers.
•
Automatic EPS backup
In the event of a power cut, the off-grid outlet takes over: 2 400 W rated power, 3 600 W peak power.
•
ZenGuard™ safety
Dual-protection BMS, self-heating and integrated aerosol shutdown. IP65-certified housing.
Why choose this system?
1
Pays for itself in around 3 years
Up to 1 591 €/year in estimated savings, with a return on investment of 2,9 to 3,4 years depending on the configuration.
2
Get more value from your installation
Up to +60% self-consumption: your solar surplus powers your home instead of being sent to the grid.
3
Built to last
10-year warranty, lifespan of up to 15 years, and capacity expandable as your needs evolve.
Take it further
Savings
Your solar surplus finally works for you
Without energy storage, the electricity produced at midday is sent to the grid, often when you are not there to use it. As soon as the smart meter detects grid injection, the SolarFlow 2400 AC+ stores this surplus, then releases it in the evening and at night. Depending on your contract, it can also charge when the kWh price is lowest and discharge during peak hours. Regulation adjusts to within one watt to limit losses.
Up to +60% self-consumptionRegulation to within 1 W840+ suppliers
Installation
Installed in four steps, without climbing onto the roof
Stack the unit on its batteries, plug in the AC cable, connect the smart meter via RJ45, then activate the system in the Zendure app. Coupling takes place on the home side: no cabling on your panels or inverter. The device can be installed indoors or outdoors, sheltered from direct sunlight and rain, with 15 cm of clearance above and 5 cm behind it.
Plug & Play 800 W3 m AC cableWi-Fi + Zendure app
Scalability
Start at 2,4 kWh and grow up to 16,8 kWh
Start with the integrated 2,4 kWh battery, then add 2,88 kWh AB3000L modules as your needs evolve. They stack directly beneath the unit, without changing the station. A single HEMS system can control up to 6 devices, allowing you to plan ahead for an electric car or heat pump.
2,4 → 16,8 kWhUp to 5 × AB3000L6 devices per HEMS
Control
More than a battery: the home's energy brain
The SolarFlow 2400 AC+ works with Zendure Smart Meter 3CT-S and 1CT-S meters, Shelly Pro 3EM, Shelly 3EM and EverHome EcoTracker. The MQTT protocol enables local integration with Home Assistant and Homey. The HEMS coordinates production, energy storage and high-consumption appliances, including more than 5 000 heat pump models and Tesla charging.
Estimated gross savings over 10 years (16,8 kWh)up to 15 900 €
Your questions answered
« I already have panels on my roof: is it really compatible? »
Yes. The SolarFlow 2400 AC+ couples on the AC side and remains compatible with rooftop PV inverters on the market. The smart meter detects the energy fed back into the grid and controls battery charging. Please note: it does not connect directly to panels because it has no MPPT input.
« 800 W by default, 2 400 W advertised: what's the catch? »
When connected to a socket in Plug & Play mode, the system is limited to 800 W. To use 2 400 W, it must be connected via fixed wiring to a dedicated circuit breaker by a qualified electrician. Our team can help you choose the right option on 04 49 42 00 99.
« What happens if the power goes out? »
The EPS function automatically switches to the battery to power devices connected to the off-grid outlet. It delivers 2 400 W continuously and up to 3 600 W peak power (200 ms), enough to keep your refrigerator, internet router and lighting running.
« Can a battery outdoors really withstand winter? »
The housing is IP65-certified and the battery self-heats at low temperatures. ZenGuard™ prevents deep discharges through intelligent charge-level control. Simply avoid direct exposure to sunlight and rain, and recharge to 60% every 2 to 3 months during prolonged inactivity.