Kitsolaire, power and simplicity. The energy of the future, available today
Language 
English
English
Français
Zendure AB3000L — 2.88 kWh extension battery for SolarFlow 2400 Pro
Add 2.88 kWh of LFP storage to your SolarFlow 2400 Pro in 30 seconds — tool-free, cable-free vertical stacking with automatic detection. Up to 5 units to reach 16.8 kWh of total capacity.
+2.88 kWh per unit · Tool-free stacking · IP65 · 6,000 cycles
2.88 kWh LiFePO4
Compatible with 2400 Pro & 2400 AC+
Up to 5 stackable units
Total up to 16.8 kWh
IP65 · -20°C to +60°C
Self-heating included
Components & technology
Stacking in 30 seconds — no tools, no cables
The AB3000L sits directly on the SolarFlow 2400 Pro via a vertical connection with integrated contacts. The main unit detects it and automatically incorporates it into its storage calculations.
2.88 kWh of high density — 48 V DC
Each AB3000L contains 2,880 Wh of LFP prismatic cells at 48 V — the optimal voltage for minimising conversion losses and maximising charging/discharging efficiency.
6,000 cycles — ~15 years at one charge per day
The LiFePO4 technology retains its capacity over 6,000 complete cycles — one of the most stable and safest chemistries on the residential market.
Self-heating — operational from -20°C
Below 0°C, the system automatically activates the internal heating system to bring the cells into their optimal charging range — maintaining performance all year round.
ZenGuard — BMS + integrated fire-fighting aerosol
Dual local and cloud BMS monitoring, protection against overvoltage, overcurrent and short circuits. Automatic aerosol system in the event of abnormal overheating, with no harmful residue.
When should you add an AB3000L?
1
Your battery runs out before morning
If the integrated 2.4 kWh of the 2400 Pro does not cover your overnight consumption, an AB3000L increases the total to 5.28 kWh — enough for most 4-person households.
2
You have added solar panels
More production = more surplus during the day. Increasing your storage capacity allows you to capture this additional surplus instead of sending it back to the grid.
3
New energy use
Electric vehicle, heat pump, water heater — each new use increases overnight consumption and justifies an additional unit.
Take it further
Capacity by configuration
Choose your level of energy independence — from 5 to 16.8 kWh
The SolarFlow 2400 Pro includes 2.4 kWh. Each AB3000L adds 2.88 kWh when stacked. Here are the possible configurations with their total capacity: 1 × AB3000L = 5.28 kWh — ideal for a 2- to 3-person household. 2 × AB3000L = 8.16 kWh — for families or households with significant evening energy use. 3 × AB3000L = 11.04 kWh. 4 × AB3000L = 13.92 kWh. 5 × AB3000L = 16.8 kWh — maximum capacity for oversized installations or use cases including an electric vehicle.
1 unit → 5.28 kWh total
5 units → 16.8 kWh total
+2.88 kWh per unit
Safety
LFP + ZenGuard: the most demanding safety in the residential segment
The LiFePO4 chemistry is inherently more thermally stable than other lithium chemistries — with an almost zero risk of thermal runaway. The AB3000L adds three layers of protection: a local BMS that monitors each cell in real time, a cloud layer for fault prediction, and an automatic aerosol system that activates if a critical temperature is detected — with no harmful chemical residue. The IP65 certification ensures complete protection against dust and water splashes.
LFP thermally stable
Automatic aerosol
IP65 certified
The AB3000L in figures
Unit price718.80 €
Capacity per unit2.88 kWh (2,880 Wh)
Nominal voltage48 V DC
Max. charging/discharging power1,680 W (1 batt.) — 1,920 W (2 batt.+)
Service life6,000 cycles — ~15 years
CompatibilitySolarFlow 2400 Pro & SolarFlow 2400 AC+
Max. number of stackable units5 units → 16.8 kWh total
Cost per added kWh~249 €/kWh
Your questions answered
« Does the AB3000L work on its own, without SolarFlow? »
No. The AB3000L is exclusively an extension battery — it does not include an inverter or grid management. It must be paired with a SolarFlow 2400 Pro or a SolarFlow 2400 AC+ to operate. If you are not yet equipped, start with the SolarFlow 2400 Pro main unit available in our catalogue.
« Is it compatible with the SolarFlow 1600 AC+ or other Zendure models? »
The AB3000L is designed and optimised for the SolarFlow 2400 Pro and SolarFlow 2400 AC+. It is also secondarily compatible with the SolarFlow 800 Series and the 1600 AC+, but Zendure recommends the AB2000X for these models. It is not compatible with Anker SOLIX BP2700 batteries. Check the compatibility of your main unit before ordering — our team is available on 04 49 42 00 99.
« How many units can I stack, and how is installation carried out? »
Up to 5 AB3000L batteries can be stacked on a single SolarFlow 2400 Pro, bringing the total capacity to 16.8 kWh. Installation is carried out vertically by stacking with integrated contacts — no cable to connect and no tools required. The SolarFlow automatically detects each added battery and updates the capacity in the Zendure app within seconds.
REF: 7096
Zendure AB3000L | 2.88 kWh
Description
Extension battery.
Store your solar surplus and use it in the evening: a smart 2.88 kWh Plug & Play battery that makes the most of every kilowatt produced by your panels.
719,00 €
Kit Solaire support
Need advice about this product?
Our technical team is here to answer all your questions and support your solar project.
Mon-Fri 9am-6pm | Sat 9am-1pm
| Garantie | 2 ans / 10 ans constructeur |
| TYPE DE BATTERIE | LiTHIUM |