Kitsolaire, power and simplicity. The energy of the future, available today
Language 
English
English
Français
Zendure Smart Meter 1CT-S
Measure your consumption in real time and let your SolarFlow solar battery adjust its power as accurately as possible: less wasted energy, more self-consumption.
Precise measurement · Local control · Compact design
0-200 A measurement
100-260 V voltage
120 A CT clamp included
Ethernet · RS485 · Wi-Fi
DIN rail format
Zen+ OS compatible
Real-time measurement
Current from 0 to 200 A and voltage from 100 to 260 V, measured continuously.
4 connection modes
Ethernet, RS485, 2.4 GHz Wi-Fi and Bluetooth: choose wired or wireless communication.
Compact DIN rail format
94 × 19 × 69 mm, with a rear clip optimised for quick installation in the electrical panel.
Zen+ OS & HEMS
Local, responsive energy management that remains reliable even without an Internet connection.
Ready to install
1 120 A current transformer and 1 screwdriver included in the box.
Built to last
Expected service life of 10 years, aligned with that of your solar installation.
Why choose this meter?
1
Make better use of every kWh
Your SolarFlow delivers exactly what you consume, no more and no less.
2
Stable even without the Internet
Wired Ethernet or RS485 connection and local control via Zen+ OS.
3
Discrete in the electrical panel
19 mm wide on a DIN rail, with just one 120 A clamp to install.
Find out more
Self-consumption
Your battery finally follows your actual consumption
Without a meter, a solar battery delivers a fixed output, whether it is useful or not. The Smart Meter 1CT-S continuously measures what enters your home. Your SolarFlow then adjusts its discharge in real time: the stored energy powers your appliances instead of being sent back to the grid.
0-200 A measurement
100-260 V
Real-time adjustment
Connectivity
Reliable communication, whatever your Wi-Fi connection
Is your electrical panel far from your router? Connect the meter via Ethernet or RS485 for stable wired communication. 2.4 GHz Wi-Fi and Bluetooth are also available for quick commissioning from the app.
Ethernet RJ45
RS485
2.4 GHz Wi-Fi + Bluetooth
Installation
A 19 mm module for your electrical panel
The meter clips onto a standard DIN rail thanks to its optimised rear clip. The 120 A current clamp opens and closes around the incoming cable without cutting it. The required screwdriver is included.
94 × 19 × 69 mm
120 A CT clamp
Screwdriver included
Compatibility
The brain of your Zendure ecosystem
The Smart Meter 1CT-S works with Zen+ OS, the energy management system (HEMS) integrated into the SolarFlow 2400 AC+, 2400 Pro and 800 Plus. Control takes place locally, with a fast response time and no dependence on an Internet connection.
SolarFlow 2400 AC+
SolarFlow 2400 Pro
SolarFlow 800 Plus
Your questions answered
« Is it compatible with my Zendure battery? »
The Smart Meter 1CT-S is designed for systems equipped with Zen+ OS: SolarFlow 2400 AC+, SolarFlow 2400 Pro and SolarFlow 800 Plus. For another model, our team can check compatibility with you on 04 83 58 04 79.
« Can I install it myself? »
The meter is installed on a DIN rail and the clamp clips around the incoming cable without cutting it. The work is carried out in the electrical panel: always switch off the main circuit breaker before starting. If in doubt, have it installed by an electrician — it only takes a few minutes.
« My Wi-Fi signal is weak near the electrical panel. Is that a problem? »
No. The 1CT-S offers a wired Ethernet or RS485 connection, independent of your Wi-Fi quality. Thanks to Zen+ OS, control remains local and continues to work even if the Internet connection is interrupted.
« Can I also measure the production of another solar installation? »
The 1CT-S is supplied with a 120 A clamp, ideal for measuring the grid supply to a home. If you want to monitor several measurement points, the Smart Meter 3CT-S, supplied with 3 clamps, is better suited to your needs.
Technical specifications
| Poids | 0,12 kg |
Documents & Guides
REF: 7064
Zendure 1CT-S Smart Meter
Description
Measure, control and optimise your electricity consumption in real time: the brain of the Zen+ OS system for zero energy waste.
84,00 €
Kit Solaire support
Need advice about this product?
Our technical team is here to answer all your questions and support your solar project.
Mon-Fri 9am-6pm | Sat 9am-1pm