Solar Kit HyxiPower 1000 W Plug & Play — 2 500 Wp bifacial panels
Two 500 Wp München Solar bifacial panels and a HyxiPower 2-in-1 microinverter: produce up to 1 450 kWh per year and reduce your electricity bill from the first month.
2 500 Wp bifacial panels1 000 VA microinverterUp to 1 450 kWh/yearUp to 284 €/yearAC and DC cables includedIP67 · -40 to +65 °C
•
Bifacial N-Type TOPCon
22,5 % efficiency and a rear side that captures light reflected by the ground or roof.
•
2 independent MPPT
Each panel is optimised separately — MPPT efficiency of 99,8 %, partial shade without a domino effect.
•
Starts at just 20 V
Produce energy early in the morning, late in the evening and under cloudy skies. Maximum microinverter efficiency: 96,7 %.
•
Wiring included
3G 1,5 mm² 5 m AC cable and 2 × 1,5 m 4 mm² DC extensions with MC4 connectors.
•
Designed for outdoor use
Fanless IP67 microinverter, double-glass panels certified for 5 400 Pa (snow) and 2 400 Pa (wind).
•
Panel-by-panel monitoring
With the optional DMU WiFi module, monitor your production in real time on the HYXI Cloud app.
Why choose this kit?
1
Pays for itself quickly
374 € for up to 284 € in annual savings: pays for itself in ~1,3 years under optimal conditions.
2
Verified compatibility
The panels' voltage, current and power remain within the microinverter's limits. No unpleasant surprises.
3
A lasting investment
30-year panel performance warranty, 12-year microinverter warranty (25 years optional).
Take it further
ÉSavings
Up to 1 450 kWh produced every year
With 1 000 Wp installed facing due south and tilted at 30° in southern France, this kit can produce up to 1 450 kWh per year. Every kWh consumed directly is a kWh you no longer need to buy from your supplier. To make the most of it, run your washing machine, dishwasher or water heater during the day.
The München Solar panels operate at 33,1 V, right in the MPPT range of the microinverter (16 to 60 V). Their open-circuit voltage of 39,7 V remains below the 65 V limit, and their current of 15,11 A remains below the 16 A limit per input. Their temperature coefficient of -0,29 %/°C limits losses on hot days.
Voc 39,7 V < 65 VImpp 15,11 A < 16 AMPPT 99,8 %
Installation
All the wiring is in the box
The kit includes the two panels, the microinverter, the 5 m AC cable and MC4 DC extensions. The mounting systems are available as an option to suit your support: ground, flat roof or pitched roof. Each panel measures 1 960 × 1 134 mm and weighs 27,5 kg: plan for two people. Remember to record the microinverter serial number before installation.
AC + DC cables includedMounting systems optionalMC4 connectors
Regulations
Safe and compliant connection
With 1 000 VA output, this kit exceeds the 800 VA threshold. The NF C 15-100 standard therefore requires a dedicated circuit from the electrical panel, with its own circuit breaker and 30 mA residual-current protection. It must not be connected to a standard wall socket. A declaration to Enedis is required: our administrative package can take care of this for you.
NF C 15-100Dedicated circuitEnedis procedures
Your estimated return on investment
Kit price (excluding options)374,00 €
Annual yield (max. estimated)1 450 kWh
ÉAnnual savings (max. estimated)284 €/year
Microinverter warranty12 years
Estimated payback period~ 1,3 years
ÉSavings over 12 years (max. estimated)+ 3 408 €
Your questions answered
« Can I connect this kit to a standard wall socket? »
No. Above 800 VA, the NF C 15-100 standard requires a dedicated circuit at the electrical panel. This protects your installation: the line is protected by its own circuit breaker and can be switched off independently.
« Are the 284 € in annual savings guaranteed? »
This is a maximum estimate: south-facing installation, 30° tilt, southern France, based on EDF Tarif Bleu 2025. Your actual savings depend on your region, orientation and, above all, the proportion of electricity you consume during the day.
« Is the DMU module essential? »
Not for production: the microinverter works without it. However, it is required to monitor your production in the app, as the S version communicates via Sub-1G radio rather than WiFi. Allow up to 24 h for monitoring activation after commissioning.
« What else do I need to plan for besides the kit? »
Mounting systems suited to your support (available as an option), a dedicated circuit at the electrical panel and, if you want monitoring, the DMU WiFi module. Have questions? Our team can advise you on 04 49 42 00 99.