Kitsolaire, power and simplicity. The energy of the future, available today
Language 
English
English
Français
DMU WiFi monitoring module HyxiPower for microinverters
The gateway that connects your HyxiPower microinverters to your router: monitor your solar production in real time, panel by panel, from the HYXI Cloud app.
Real-time monitoring · WiFi or Ethernet · Zero injection
Sub-1G to microinverters
WiFi 802.11 b/g/n
Ethernet RJ45 100 Mbps
Single-phase and three-phase
Zero injection (meter required)
Indoor use IP20
Essential for S versions
HyxiPower microinverters marked « S » communicate via Sub-1G: the DMU transmits their data to HYXI Cloud.
Triple connectivity
Sub-1G radio on the roof side, WiFi 802.11 b/g/n or Ethernet RJ45 100 Mbps on the router side.
Module-by-module monitoring
Real-time production, history and alarms for each solar panel in your installation.
Zero-injection function
When paired with a HyxiPower single-phase or three-phase energy meter, it limits grid injection.
Secure data
Encrypted transmission and local storage: after an internet outage, sending resumes without data loss.
Remote maintenance
Software updates, configuration and alarm analysis without on-site intervention.
Why choose this module?
1
See what you produce
Without a DMU, an S-version microinverter produces power but sends no data to the app.
2
Detect a fault quickly
Smart alarms and panel-by-panel monitoring: a module that disconnects is identified immediately.
3
Support that stays with you
Link your account to our technical support team for direct configuration assistance.
Take it further
Monitoring
Your production visible, panel by panel
The DMU continuously collects data from each microinverter and sends it to the HYXI Cloud platform. From the app, you can view today's production, history and the status of each module. In the event of an anomaly, an alarm alerts you so you can act quickly and preserve your efficiency.
Real time
Module-by-module monitoring
Smart alarms
Connectivity
A radio link designed to pass through walls
Between the roof and the DMU, the Sub-1G iMesh link passes through up to 5,5 walls and reaches up to 1 500 m according to the manufacturer. For difficult configurations, a communication antenna set is available as an option. Inside the home, the DMU connects to your router via WiFi or Ethernet cable for an even more stable connection.
Up to 5,5 walls
WiFi 802.11 b/g/n
RJ45 100 Mbps
Control
Zero injection: use what you produce
Add a HyxiPower energy meter, single-phase or three-phase depending on your installation, and the DMU adjusts your microinverter production to match your consumption. Surplus energy is no longer sent to the grid. A suitable solution if you choose self-consumption without surplus injection.
Single- or three-phase meter
Meter sold separately
Self-consumption
Installation
Place it near your router, sheltered from the elements
Compact (106 × 216 × 79 mm with base) and lightweight, the DMU connects without additional wiring. IP20 rating: install it indoors, within radio range of your microinverters. Note the microinverter serial numbers before installation, as they are used for pairing. Monitoring activation can take up to 24 h.
0,4 kg
IP20 indoor
Plug-and-play
Your questions answered
« Do my panels produce power without the DMU? »
Yes. The microinverters convert and inject power without it. The DMU is used for monitoring: without it, S versions (Sub-1G radio, without integrated WiFi) display no data in the app.
« Is the configuration complicated? »
The connection is simple; adding the microinverters in the app requires some method. Keep their serial numbers at hand and leave the DMU powered within radio range. To link your account to our technical support team, write to [email protected] or call 04 83 58 04 79.
« My roof is far from my router; will the connection hold? »
Sub-1G radio is designed for long distances and passes through several walls. If your configuration is difficult (thick walls, metal roof), the optional HyxiPower communication antenna set strengthens the connection.
« Can I prevent my surplus from being injected into the grid? »
Yes, with a HyxiPower energy meter suited to your installation (single-phase or three-phase), sold separately. The DMU then regulates production so that it follows your consumption.
Documents & Guides
REF: 2004
Monitoring module - DMU - WiFi - HyxiPower
Description
Ultra-simple and stable connection
109,99 €
Kit Solaire support
Need advice about this product?
Our technical team is here to answer all your questions and support your solar project.
Mon-Fri 9am-6pm | Sat 9am-1pm