4 500 Wp Munchen Solar bifacial N-Type panels, a HyxiPower HYX-M2000-S microinverter with 4 independent MPPT inputs and a free DMU WiFi monitoring module — up to 2 900 kWh per year to cover a large share of your household’s consumption.
4 × Munchen Solar 500 Wp bifacial panelsHYX-M2000-S — 4 MPPTEstimated 2 900 kWh/yearSavings of up to 568 €/yearFree DMU WiFi module25–30-year warranty
Components & technology
•
2000 W microinverter with 4 MPPT inputs
The HYX-M2000-S manages 4 panels rated from 400 to 670 W each completely independently — no losses on the other panels if one is partially shaded.
•
4 Munchen Solar N-Type TopCon panels
N-Type bifacial technology — efficiency of up to 22,9%, captures light from both sides, with a 25-year product warranty and 30-year linear power performance warranty.
•
Free DMU WiFi module
Included in this solar kit: the HyxiPower DMU module connects the microinverter to your WiFi network for real-time panel-by-panel monitoring via the mobile app.
•
Reinforced 2,5 mm² cabling
The supplied AC cable has a 2,5 mm² cross-section (vs 1,5 mm² on kits < 1 000 W) — sized for the 2 000 W output and compliant with NF C 15-100.
•
Complete, ready-to-use solar kit
4 solar extension cables included for flexible panel positioning. Nothing else to buy for immediate commissioning.
•
25-year manufacturer warranty
HyxiPower HYX-M2000-S microinverter with a 25-year warranty — the best warranty in its category, providing long-term peace of mind.
Why choose this solar kit?
1
Pays for itself in approximately 1 year
Estimated savings of 568 €/year for an affordable initial investment — one of the best ROIs in the range without energy storage.
2
4 MPPT inputs for 0% losses
Each panel is optimised independently. A shaded or dirty panel never impacts the production of the other three.
3
25-year warranty with no compromises
Panels with a 25-year product / 30-year power warranty, 25-year microinverter warranty — the same warranty as premium ranges, without the premium price.
Take it further
Savings
568 € off your bill from the first year
With 4 500 Wp bifacial panels, this solar kit produces up to 2 900 kWh per year when facing due south at a 30° tilt in southern France. This energy is injected directly into your household circuit as it is produced, proportionally reducing your grid purchases. Based on the 2025 EDF blue tariff, estimated savings reach 568 €/year — nearly 14 200 € over 25 years.
Estimated 2 900 kWh/year568 €/year in savings2025 EDF blue tariff
Performance
A microinverter designed for 4 panels, not 2
The HYX-M2000-S is specifically designed to control 4 panels rated from 400 to 670 W each via its 4 fully independent MPPT inputs. Unlike two HYX-M1000-S microinverters connected in parallel, it centralises management and monitoring in a single device, simplifying installation and maintenance. The supplied AC cable with a 2,5 mm² cross-section ensures loss-free transmission at full power.
4 independent MPPT inputs4 × 400–670 W input2,5 mm² cable included
Installation
Dedicated circuit — safe and compliant from day one
Above 900 W, the NF C 15-100 standard requires connection to a dedicated circuit via the electrical panel — an operation that can be completed in a few hours. The solar kit is supplied with a 5 m AC cable / 2,5 mm² and 4 solar extension cables for flexible panel positioning. Simplified Enedis declaration online for commissioning. No Consuel required below 3 kWp.
NF C 15-100 dedicated circuitNo ConsuelSimplified Enedis declaration
Monitoring
Your production in your pocket, panel by panel
The HyxiPower DMU WiFi module, included free with this solar kit, connects the microinverter to your internet router and sends data from each panel in real time to the HyxiPower mobile app. View instant production, daily curves and monthly reports. If a panel malfunctions, an alert immediately notifies you so that you do not lose a single kWh.
« What is the difference compared with the 1 000 W HyxiPower solar kit? »
The 2 000 W solar kit doubles production (2 900 vs 1 450 kWh/year) with a single HYX-M2000-S microinverter featuring 4 independent MPPT inputs instead of 2. The result: a simpler installation with a single device to manage, one AC cable with a reinforced 2,5 mm² cross-section, and a lower cost per kWh produced.
« Do I need an electrician to install this solar kit? »
Connection to a dedicated circuit is required (NF C 15-100 standard for outputs above 900 W). This operation, accessible to an electrician or an experienced DIY enthusiast, takes a few hours. No Consuel is required below 3 kWp — a simple online Enedis declaration is sufficient for commissioning.
« Can I add a battery later to store the surplus? »
Yes. This solar kit without energy storage is designed to inject energy directly into your household circuit. If you want to store surplus energy for use at night, a Plug & Play battery (such as the Anker SOLIX Solarbank 3 Pro) can be added later without modifying or replacing this solar kit.
Reduce your electricity bill by up to 568 €/year from the first year.
This 2000W solar kit combines 4 500 Wp Munchen Solar N-Type TopCon bifacial panels and 1 2000 W HYX-M2000-S Hyxipower microinverter + a free DMU WiFi module!