Kitsolaire, power and simplicity. The energy of the future, available today
Language 
English
English
Français
Anker SOLIX Gen 2 Smart Meter (three-phase)
Measure the consumption of your three phases in real time and let your Solarbank adjust its power to the nearest watt: you consume your solar energy instead of injecting it into the grid for free.
Measurement in 3 seconds · Dual circuit · Home Assistant compatible
Three-phase L1/L2/L3
3-second responsiveness
Triple 63 A CT kit included
DIN rail · 19 mm
Wi-Fi · Bluetooth · RS-485
Class 1 accuracy
Control in 3 seconds
The meter tracks the actual demand across all 3 phases; your Solarbank adjusts in 3 seconds.
Dual-circuit monitoring
The main grid and third-party PV or battery system are monitored separately, with a second CT kit.
Overcurrent protection
In the event of a risk, the Solarbank automatically reduces its output power.
Weidmüller SNAP IN connectors
Tool-free connection for 0.5 to 2.5 mm² wires, locked in place upon insertion.
19 mm thick
50% less space required in the consumer unit than the previous generation.
Home Assistant integration
Modbus-TCP on the local network, without a cloud relay, for your home automation routines.
Why choose this meter?
1
Your solar energy stays at home
Power adjusted to the nearest watt in 3 seconds: less energy wasted on the grid.
2
A complete view of your energy
Grid, Solarbank and existing PV installation brought together in a single app.
3
Reliable over time
Class 1 accuracy, an estimated 10-year service life and a 2-year warranty.
Find out more
Self-consumption
Your battery finally knows what your home is consuming
Without a meter, a solar battery delivers a fixed amount of power, often too high or too low. The Gen 2 meter continuously measures the current of each phase at the grid connection point. Your Solarbank receives this information in 3 seconds and adjusts its output to your actual needs. Result: you consume more of your own solar electricity.
3-second responsiveness
Current ±1 % (1-120 A)
Class 1
Renovation
Add energy storage to your existing panels
The meter has two measurement points. The GRID CT monitors the home's main circuit, while the PV CT tracks your existing photovoltaic installation or a third-party battery. You can see where your electricity comes from and where it goes. This function requires an additional triple CT kit, sold separately, and a Solarbank 4 Pro or Max AC.
2 measurement points
Existing PV compatible
1 single platform
Safety
Your consumer unit protected at all times
Intelligent overcurrent detection monitors high-power grid connections. If a risk occurs, the meter and Solarbank reduce the output power together, before any overload. During installation, the system automatically detects and corrects two common errors: CTs incorrectly matched to phases L1/L2/L3, or all CTs installed in the wrong direction.
Active overload protection
Automatic L1/L2/L3 correction
Solarbank 4 Pro / Max AC
Installation
A DIN rail module that fits in any consumer unit
At 19 mm thick, the meter clips onto a standard DIN rail. The Weidmüller SNAP IN terminals accept solid, flexible or ferruled wires without tools. The 63 A CTs included in the triple kit fit through a 10 mm opening; the optional 120 A CTs fit through a 16 mm opening. We recommend installation by a qualified electrician.
19 mm thick
0.5-2.5 mm² wires
9 mm stripping length
Your questions answered
« Is it compatible with my Solarbank? »
Yes, with the Solarbank Max AC, Solarbank 4 E5000 Pro, Solarbank 1, 2 and 3. With Solarbank 1, 2 and 3, the CT port (PV/ESS), circuit protection, automatic CT correction and monitoring of third-party PV are not available. All other functions remain available.
« Is the included 63 A CT kit sufficient for my installation? »
The CT must match the rating of your main circuit breaker. Up to 63 A, the included triple CT kit is sufficient. Above this, choose the 120 A triple CT cable, sold separately. To also monitor an existing PV installation, plan for an additional CT kit.
« Can I install it myself? »
The meter is installed in your consumer unit: we recommend having it installed by a qualified electrician. The tool-free terminals and DIN rail mounting make installation quick. Our team can answer your questions on 04 83 58 04 79.
« Can I integrate it with Home Assistant? »
Yes. The meter supports Modbus-TCP and TCP/IP in transparent transmission mode. It communicates directly with Home Assistant on your local network, without the cloud, for real-time monitoring and local automations.
Documents & Guides
REF: 6033
Anker Solix Gen 2 Three-Phase Smart Meter
Description
DIN rail-compatible smart meter
Solarbank 4 E5000 Pro & Solarbank Max AC.
Power adjustment in 3 seconds, dual CT circuit, automatic wiring correction. Class 1, Wi-Fi + RS485, 19 mm.
119,00 €
Kit Solaire support
Need advice about this product?
Our technical team is here to answer all your questions and support your solar project.
Mon-Fri 9am-6pm | Sat 9am-1pm