Mounting kit for 2 solar panels in portrait orientation for Roman tiles — MIBET
Securely mount 2 photovoltaic panels in portrait orientation on your Roman tile roof: hooks, rails and clamps combined in a single kit, ready to install.
Specially designed for Roman tiles · Complete kit · Overlay mounting
2 panels in portrait orientation6 Roman tile hooksAluminium railsOverlay mounting1 row of panels
•
Specially designed for Roman tiles
6 hooks designed for the curved profile of Roman tiles, screwed directly into the rafters.
•
All-in-one kit
All the parts for 2 panels in a single pack: nothing to calculate, nothing to order separately.
•
Aluminium rails
2 rows of rails, upper and lower: a lightweight structure that does not rust.
•
Rafter anchoring
3 hooks per rail: the rafters, not the tiles, support your panels.
•
No tiles drilled
Remove the tile, screw in the hook, then put the tile back in place.
•
Range from 1 to 8 panels
The same MIBET system is available for 1 to 8 panels in portrait orientation on Roman tiles.
Why choose this kit?
1
Error-free ordering
Hooks, rails, clamps and screws sized for 2 panels: no parts forgotten.
2
Your roof protected
Hooks secured to the rafters, tiles put back in place: no tiles are drilled.
3
An installation that can grow
More panels later? The MIBET range accommodates up to 8 panels per row.
Take it further
Installation
A methodical, step-by-step installation
Remove the tile directly above each hook, screw the hook into the rafter, then put the tile back in place, grinding it slightly if necessary. The rails are then secured to the hooks. Finally, your panels are tightened onto the rails with the clamps. For your safety, work in pairs on the roof.
6 anchoring points2 panels in portrait orientation2-person installation recommended
Compatibility
A hook designed for Roman tiles
Roman tiles have a pronounced curve on which a generic hook does not sit properly. The hooks in this kit are designed for this profile. Before ordering, check your roof covering type: for interlocking tiles, flat tiles, slate or sheet metal, choose a dedicated kit.
Roman tileOverlay mountingPortrait orientation
Durability
A structure built to last
The aluminium rails remain lightweight and are resistant to rust. The steel hooks are screwed into the roof structure: it supports the weight of the panels and the wind loads. Your tiles only serve as the roof covering.
Aluminium railsSteel hooksRafter anchoring
Scalability
One row today, several tomorrow
This kit is configured for a single row of 2 panels. For two rows, simply purchase two kits. And if you are planning a longer row, the MIBET range for Roman tiles accommodates 1 to 8 panels in portrait orientation.
1 row = 1 kitRange from 1 to 8 panels
Your questions answered
« Do I need to drill my tiles to install this kit? »
No. Simply remove the tile at each hook location, screw the hook into the rafter, then put the tile back in place. The mounting is secured to the roof structure, not the roof covering.
« My Roman tile is very curved — will the hooks fit? »
The hooks are designed for the profile of Roman tiles. Depending on your roof, it may be necessary to grind the tile slightly where the hook passes, or to shim it if the height between the rafter and the top of the tile is significant. Measure this height before installation.
« I have more than 2 panels, or several rows: what should I do? »
Each kit covers one row. For several rows, multiply the number of kits. For a longer row, choose the corresponding MIBET kit directly, available for 1 to 8 panels in portrait orientation.
REF: 3030
Mounting for 2 solar panels in portrait orientation for Roman tiles - Mibet
Description
[Composition] 4x 1250 mm aluminium mounting rails 3x Universal rail splice 6x Mounting hooks for Roman tiles 18x Wood structural screws 6x Universal mounting clamps 30-50 mm 4x Rail bolts for microinverter mounting