Safely store solar energy from your balcony or roof: a TÜV-certified LiFePO4 battery that is silent, expandable and compatible with 99 % of microinverters on the market.
TÜV-certified — compatible with 99 % of microinverters
Independent TÜV validation. Works with Hoymiles, APsystems, Enphase and almost all microinverters on the market.
•
LiFePO4 — 6 000 cycles, 15 years of use
The lithium iron phosphate chemistry does not ignite and degrades only very slowly — 10-year manufacturer warranty.
•
Plug & Play stackable with up to 4 modules
Only one cable is needed. Add batteries and reach 3 840 Wh without tools or reconfiguration.
•
IP65 — balcony, terrace, roof, facade
Certified against dust and water splashes. Compact dimensions: 350 × 200 × 186,5 mm / 12 kg.
•
Silent operation — 0 dB
No fan and no noise. Ideal for homes, balconies or exposed living spaces.
•
Zendure AIoT app
Real-time monitoring of production, consumption and state of charge from your smartphone.
Why choose this battery ?
1
Fast ROI — each kWh is worth 0,25 €
Instead of injecting it into the grid at 0,10 €, you use your 960 Wh in the evening. ~72 € saved per year and per battery.
2
No electrician or paperwork required
Plug & Play connection to a standard socket. TÜV-certified. No Consuel and no additional declaration.
3
Scalable system — never obsolete
Start with 960 Wh. Add 3 additional batteries tomorrow — same hub, same app, no replacement needed.
Take it further
Savings
Your bill drops from the very first cycles
Without a battery, every kWh produced in the afternoon is injected into the grid at less than 0,10 €. With the AB1000, you store it and use it in the evening at its true value — up to 0,25 €/kWh. The Zendure app shows you in real time how much you have saved.
960 Wh per cycle~72 €/year estimated15-year service life
Safety
TÜV-certified LiFePO4: the safest on the market
Unlike NMC batteries, LiFePO4 cells do not catch fire in the event of a failure. The integrated BMS automatically cuts off the circuit in the event of overheating or overcurrent. TÜV certification independently validates this safety for domestic use.
TÜV-certifiedMulti-threshold BMSIP65
Scalability
From 960 Wh to 3 840 Wh — without changing the hub
The SolarFlow hub manages up to 4 AB1000 batteries in parallel. Stack them using the proprietary locking connector. The system automatically reconfigures itself without any manual settings.
Up to 4 units3 840 Wh maxLocking connector
Installation
Compact, lightweight and easy to move
350 × 200 × 186,5 mm and 12 kg: the AB1000 can be placed on a balcony, facade or roof. A single cable connects the battery to the hub. Dismantle and move it in just a few seconds, without specialist tools.
12 kg350 × 200 × 186,5 mmPlug & Play
Your estimated return on investment
AB1000 battery price418,80 €
Usable capacity per cycle960 Wh
Estimated savings per cycle (at 0,25 €/kWh)~0,24 €
Estimated annual savings (~300 cycles)~72 €/year
Manufacturer warranty10 years
LiFePO4 service life15 years (6 000 cycles)
Estimated payback period~6 years
Savings over 15 years+ 660 €
Your questions answered
« Is it compatible with my microinverter ? »
The AB1000 is certified as compatible with 99 % of microinverters on the market (Hoymiles, APsystems, Enphase…). TÜV certification independently validates this interoperability. If you are unsure about your model, our team on 04 83 58 04 79 can confirm compatibility before purchase.
« Can I install it on a balcony safely ? »
Yes. IP65 certification guarantees protection against dust and water splashes. LiFePO4 technology — unlike NMC batteries — poses no risk of thermal runaway. Operation is silent (0 dB) and does not disturb neighbours.
« Is it really worth 349 € ? »
At 0,25 €/kWh and ~300 cycles per year, each AB1000 saves approximately 72 € annually. The investment pays for itself in less than 5 years, and the battery comes with a 10-year warranty and an estimated service life of 15 years. In the following years, the stored electricity is free.
« Will this battery be obsolete in 5 years ? »
The battery receives software updates via the Zendure AIoT app. It is backward-compatible with all current and future SolarFlow hubs. You can add up to 3 additional batteries at any time, without replacing anything.